Saturday, August 24, 2019

Business law - Case Essay Example | Topics and Well Written Essays - 500 words

Business law - Case - Essay Example But he has neglected the aesthetic aspects of the treatment and thought that causing a burn to the patient is negligible as part of saving the life of the patient. In that sense the doctor was culprit of neglecting certain critical things in his profession. If the surgery was unavoidable at that juncture, probably the doctor’s actions could have been justified. On the other hand, there are no such worries in declaring the ECR instrument manufacturer as the major culprit in this case. This manufacturer has sold defective products in the market which caused damages to the users. It is the responsibility of the manufacturer to test the quality of the product fully before introducing it in to the market. He should ensure that his product may not cause any damages to the users. No product manufacturer has the right to sell defective products in the market. The specifications and usage instructions of the product should be given to the users by the manufacturer and the manufacturer is responsible for any malfunctioning of the product provided the users use it exactly as per the instructions given by the manufacturer through the product manual. So the manufacturer of the ECR instrument is 100% responsible for this crime and need to be compensated Karl for that. Apart from the doctor and the ECR manufacturer, the hospital management is also responsible for Karl’s agony. The management purchased cheap quality products and took the risk of using it in the treatment of patients. It is the responsibility of the management to ensure the quality of the products they purchased before testing it on others. So, in my opinion, Karl can consider suing against the hospital management also. Anaesthesiologist and the nurses have nothing to do with this case. The duty of the anaesthesiologist is confined to the anaesthesia alone. He has nothing to do with the usage of

Friday, August 23, 2019

The Concept of Health Literacy in Promoting and Maintaining Adolescent Essay

The Concept of Health Literacy in Promoting and Maintaining Adolescent Health - Essay Example Factors affecting the concept of health literacy in adolescents are discussed. Recommendations to develop and enhance adolescent health literacy are included. Keywords: health literacy, adolescent, health promotion. The Concept of Health Literacy in Promoting and Maintaining Adolescent Health A young diabetic man, aged 14, learns about a new clinical trial on a new diabetic medicine. He goes to the study site to learn more about the trial. The adolescent is asked to sign an informed consent form; he must also have this form signed by his parents. However, once his mother sees the informed consent form, she realizes that her son’s participation in the trial will put him at high risks of health complications, since his current medicines and health state are in conflict with what is required for and being tested during the trial. This is a routine situation that exposes the role of health literacy for promoting and maintaining adolescent health. Adolescents must be able to read a nd understand health information. They should be able to use this information in ways that empower them to take proper health decisions. It goes without saying, that the adolescent health literacy is affected and mediated by a multitude of internal and external factors. In this sense, the concept of health literacy in adolescents can be defined as the degree to which young people are capable of accessing, reading, processing, and comprehending health information and use this information to take proper health decisions, promote and maintain their health, based on continuous interactions with their social and cultural environments. Literacy and Health Literacy among Australians Health promotion has long been one of the primary goals of health care; yet, it was not before the 1990s that the importance of health literacy was officially recognized. In the early 1990s health literacy was included in Australia’s health targets and goals (Keleher & Hagger, 2007). These goals and targ ets include improving language skills, population literacy, and public knowledge of health and health literacy, to ensure that individuals have the information and knowledge required to take informed health decisions (Keleher & Hagger, 2007; Borzekowski & Rickert, 2001). Unfortunately, less than one-fifth of Australians have high levels of literacy, which impedes the development and implementation of health promotion policies (Keleher & Hagger, 2007). Only every third Australian possesses functional literacy to cope with their everyday tasks (Jorm et al., 2006). Thus, just about one half of all Australians have the skills and potential to affect health decisions and promote their own health. This raises the question of bringing up health literacy from a young age. Why care about health literacy among adolescents? The answer is simple: there is no health without health literacy. Limited health literacy is associated with increased utilization of health care services (Keleher & Hagger , 2007). Poor health outcomes are direct results of low health literacy (Farrer et al., 2008; Keleher & Hagger, 2007). Low health literacy predicts poor verbal communication with health care providers and poor medication compliance (Keleher & Hagger, 2007). Therefore, it is imperative that adolescents have the level of health literacy needed to promote and maintain their health. Undoubtedly, superior health literacy is one of the foundational elements of improved health in adolescents and adulthood. The long-term effects of literacy on

Thursday, August 22, 2019

Effectiveness of Time and Financial Management Essay Example for Free

Effectiveness of Time and Financial Management Essay Chapter 1 I. Introduction A. General Statement to the Effectiveness of Time and Financial Management on selected scholars of Adamson University 1. Profile of the Selected Scholars B. Statement of the problem ( How can they cope up with the demands of their respective courses? C. Objectives of the study D. Relevance of the study E. Definition of terms Chapter 2 II. Survey of Related Literature A. Foreign studies 1. Working Students/Student Assistants 2. Scholars B. Local Studies 1. Working Students/Student Assistants 2. Scholars Chapter 3 III. Methods on how to measure effectiveness of time and financial management A. Results of Survey/Questionnaire to the Selected Scholars of Adamson University 1. Graphical Representation 2. Analysis of the results IV. Conclusion Chapter 3 Methods on how to measure Effectiveness of Time and Financial Management The researchers chose 7 different scholars to conduct a survey about the chosen topic. Most of the respondents came from student assistant’s category and the others came from the category of academic scholars. These scholars were given scholarships from Ozanam Study Grant Program and Megaworld Foundation. On the range of their ages, 17-22 years old were the students who were given an opportunity they wanted to have. The scholars being interviewed have a daily allowance of more or less 150 pesos. On the Graph 1.1 being shown below are some of the expenses of the following students. Graph 1.1 A little number of respondents said that they stay in boarding houses that cost them Php 1,600 to Php 1,700. Literally, the cost was being solved by their parents. 3 out of 7 students said that both of their parents are self-employed. 1 respondent said that his/her parents run a business and another corresponds to unemployed parents. The rest of the students match up on other answers like their father/mother neither is an overseas Filipino worker, a tricycle driver, a plain housewife nor was deceased. Researchers proceed to the monthly income of their parents in able to measure the financial background of each and every respondent. Graph 1.2 illustrates the possible monthly income of the parents of these learners. Graph 1.2 As you can see, there is an equality of 14,000 and lower and 15,000-20,000 income. It is based on the survey being conducted by the researchers and from the occupation of their parents. On the part of their financial management, they spent the biggest part of their allowance for their food (50%) followed by their transportation and some other expenses. This shows that food is very important especially for the scholars like them. Food is an essential and they must not ignore because of the responsibilities they have in the university. The primary reason of the pupils asked in preferring themselves in being a scholar of Adamson University is that because they wanted to help their parents in decreasing the expenses. In this reason, an individual can determine that financial or money matters are the first basis in order for them to have financial management. Other reasons are for them to gain independency. The effectiveness of financial management is measured by proper usage of money and thinking a creative way of using up money.  The researchers also find ways on evaluating time supervision of scholars. Because of a more number of student assistants being interviewed, most of their time is allotted on their duties. Here is Graph 1.3 that shows how long an ordinary scholar uses his /her time in the university. Graph 1.3 Take a look of the graph that has been illustrated by the researchers. Student D and F are academic scholars. According to the information gathered from the survey, these students are academic scholars. As academic scholars, their worlds are focused on studying. They usually spend time in resting, studying and even have a time for leisure. On the other hand, the remaining students (A, B , C and E) make use of their time in duties and offices. Equalizing time in each activity of a student like them is not easy to do. Like on the Graph 1.3, student assistants are divided in different opinions. Some of them were able to balance their time and others cannot. Same answer was derived by academic scholars. However, they also answered it depends on the situation. Situations are unpredictable and make equalization of time in different planned activities. Somehow, all of them have a time for rest and have a break after long hours from school. Lastly, as a scholar, grade is the most important or basis in acquiring scholarships. Grades of these scholars are not affected by activities being done in school. Therefore, these learners have a good strategic measures in managing their time and studies. Chapter 4 Conclusion Based on the presented and interpreted data above, the following conclusions were drawn: 1. That most of the scholars spend their money more on food  for it is an essential need. 2. That most of the scholars wanted to help their parents to reduce the number of expenses. 3. That most of the scholars allot their time to school by doing different duties but assures that grades of them will not be affected. Chapter 2 Survey of Related Literature

Wednesday, August 21, 2019

Crops and vegetables Essay Example for Free

Crops and vegetables Essay Contribution of Crops in 1995-96 was 15. 03, in 1997-98 was 14. 59, in 1999-00 was 14. 59, in 2001-02 was 13. 75, in 2003-04 was 13. 23, in 2005-06 was 12. 19. Contribution of crops and vegetables is decreasing year by year. Though production of crops has increased our land has decreased, so our total production has decreased and thus contribution of crops on economy is decreasing. Contribution of Crops and Vegetables in total agriculture in 1995-96 was 58. 53%, in 1997-98 was 57. 58%, in 1999-00 was 57. 04%, in 2001-02 was 57. 32%, in 2003-04 was 57. 32%, in 2005-06 was 55. 99%. From these percentage amounts we can easily say that among the total agriculture sector, contribution of crops and vegetables is most and it is more than 5o% in each year. If we can not increase our crops production then it will have no contribution on GDP. Livestock Contribution of Livestock in 1995-96 was 3. 36, in 1997-98 was 3. 19, in 1999-00 was 3. 02, in 2001-02 was 2. 96, in 2003-04 was 2. 91, in 2005-06 was 2. 93. Though many firms are being established day by day livestock is not contributing enough on GDP. Contribution of Livestock in total agriculture in 1995-96 was 13. 08%, in 1997-98 was 12. 59%, in 1999-00 was 11. 81%, in 2001-02 was 12. 34%, in 2003-04 was 12. 61%, in 2005-06 was 13. 46%. From these above percentage amounts we can say that though our livestock production is not increasing. But contribution of livestock on total agriculture is increasing in recent years. Forestry As we are cutting down more trees to meet our daily need our forestry is gradually decreasing day by day and thus contribution of forestry on GDP is also decreasing. Contribution of Forestry in 1995-96 was 1. 90, in 1997-98 was 1. 89, in 1999-00 was 1. 88, in 2001-02 was 1. 88, in 2003-04 was 1. 83, in 2005-06 was 1. 79. Contribution of Forestry in total agriculture in 1995-96 was 7. 52%, in 1997-98 was 7. 46%, in 1999-00 was 7. 35%, in 2001-02 was 7. 84%, in 2003-04 was 7. 93%, in 2005-06 was 8. 22%. As other sub-sector is decreasing more than forestry, contribution of forestry on total agriculture has increased in recent years. Agriculture and forestry Fisheries Contribution of Fisheries in 1995-96 was 5. 36, in 1997-98 was 5. 67, in 1999-00 was 6. 09, in 2001-02 was 5. 40, in 2003-04 was 5. 11, in 2005-06 was 4. 86. We see that contribution of fisheries on GDP was increasing from 1995-96 to 1999-2000, but after that it has been decreasing. Though the contribution of fisheries is not much on GDP of Bangladesh, this sub-sector has become an important and major source of agriculture. Contribution of Fisheries in total agriculture sector, in 1995-96 was 20. 87%, in 1997-98 was 22. 38%, in 1999-00 was 23. 81%, in 2001-02 was 22. 51%, in 2003-04 was 22. 14%, in 2005-06 was 22. 32%. Which is more than livestock and forestry. Sector/ Sub sector 95-96 96-97 97-98 98-99 99-00 00-01 01-02 02-03 03-04 04-05 05-06 Crops 15. 03 15. 21 14. 59 14. 33 14. 59 14. 7 13. 75 13. 43 13. 23 12. 51 12. 19 In ( % ) 58. 53 58. 80 57. 57 56. 68 57. 03 58. 72 57. 31 57. 22 57. 32 56. 14 55. 99 Livestock 3. 36 3. 27 3. 19 3. 12 3. 02 2. 95 2. 96 2. 93 2. 91 2. 95 2. 93 In ( % ) 13. 08 12. 64 12. 58 12. 34 11. 80 11. 78 12. 33 12. 48 12. 60 13. 24 13. 45 Forestry 1. 93 1. 91 1. 89 1. 9 1. 88 1. 87 1. 88 1. 86 1. 83 1. 82 1. 79 In ( % ) 7. 51 7. 38 7. 45 7. 51 7. 34 7. 47 7. 83 7. 92 7. 92 8. 16 8. 22 Fisheries 5. 36 5. 48 5. 67 5. 93 6. 09 5. 51 5. 4 5. 25 5. 11 5 4. 86 In ( % ) 20. 87 21. 18 22. 37 23. 45 23. 80 22. 01 22. 50 22. 36 22. 14 22. 44 22. 32 Total 25. 68 25. 87 25. 34 25. 28 25. 58 25. 03 23. 99 23. 47 23. 08 22. 28 21. 77 Contribution of Agriculture in Employment The linkage between the agricultural sector and the economy in general is in terms of employment generation. This is especially important because agriculture is by far the largest employer of poor people, and therefore has a key role in poverty alleviation. According to the 1981 census, total employment was approximately 24 million people (Table 2. 7). Of these, more than 60 per cent were employed in the agricultural sector, representing 14. 5 million people. This figure represents those directly working in agriculture and does not include employment in agricultural-related manufacturing industries. According to the 1991 census, the number of employed in agriculture increased to 16. 3 million. While this figure shows that the share of agriculture in total employment declined over the 10-year period, agriculture still provided employment for well over half the total workforce (again excluding employment in agriculture related industries). Statistics of the Labor Force Survey (LFS) in 1989 and again in 1991 show a similar pattern, although they indicate a more significant role for agriculture in employment generation. The main difference between the two surveys is that the LFS includes household-based economic activity, and therefore perhaps provides a better picture of actual employment patterns and trends. According to the 1989 LFS, almost three-quarters of the all employment were derived directly from the agricultural sector, with 34 million employed. The 1991 survey showed that agriculture continued to provide a livelihood for the vast majority of Bangladeshis, although its share dropped slightly in comparison to non-farm employment. According to the last census which is took place in 2002-2003 the labor force working in agriculture is 51. 7% of the total labor force of the country. Women participation in Agriculture In the socio-economic context of Bangladesh, involvement of women in agriculture is very important. It would be easier to control rural-urban migration by engaging women in agricultural activities to a greater extent. Considering women. s involvement in agriculture, the following programmes will be taken up for enhancing their role under the scope of the National Agriculture Policy: Agriculture related activities like post harvest operations, seed preservation, nursery business, jute stripping, vegetable cultivation, homestead gardening, floriculture, production of horticultural seeds, establishment and management of cottage industries based on locally produced agricultural commodities, etc are very suitable for women. Extensive training programmes will be conducted and capital support will be provided to encourage women’s interest and improve their skill in such activities. the women are always a major employment force of agriculture. A large majority of the households in Bangladesh depend upon agriculture and related activities like livestock rearing, fisheries and forestry. In 1992-93, crops accounted for 77. 7% of the total agricultural production, fisheries 7. 8%, livestock 7. 7% and forestry 6. 7%. The agricultural sector accounted for nearly 36% of Gross Domestic Product . Despite their routine domestic work, women are very actively involved in agricultural production in Bangladesh. Women in rural Bangladesh are in general responsible for most of the agricultural work in the homestead. They traditionally undertake home gardening. Farm activities in the homesteads, ranging from selection of seed to harvesting and storing of crops, are predominantly managed by women. Despite womens important role in agriculture, the traditional social norms and customary laws combined with the purdah system deprive Bangladeshi women of equitable economic opportunities and access to resources.

Luminescence in Low-dimensional Nanostructures

Luminescence in Low-dimensional Nanostructures NANO AU RSY Luminescence in Low-dimensional Nanostructures: Quantum Confinement Effect, Surface Effect Whenever the carrier localization, at least in one spatial direction, becomes comparable or smaller than the de Broglie wavelength of carriers, quantum mechanical effects occur. In this limit the optical and electronic properties of the material change as a function of the size and the system is called a nanostructure. As the size is reduced the electronic states are shifted toward higher energy and the oscillator strength is concentrated into few transitions. Nanostructures are classified by the number of dimensions in which the carriers are confined or, alternatively, free to move. In case of confinement in only one spatial direction, the nanostructure is named a quantum well (QW). The carrier motion is frozen in one dimension but electrons and holes can still freely move over the other two directions. Therefore the QW is a quasi two-dimensional (2D) system. A structure which provides carrier confinement in two directions, allowing the motion along the remaining dimension, is calle d quantum wire (QWR) and it is a quasi 1D system. In the case of confinement in all three spatial coordinates, the nanostructure is denominated quantum dot (QD). QDs are 0D systems since the carrier motion is completely frozen. The physics of the quantum size effect relies on the Heisenberg uncertainty principle between the spatial position and kinetic momentum of a quantum particle. It is not possible to measure both the momentum and position of a particle to an arbitrary precision. The product of the standard deviation in space and momentum satisfies the uncertainty relation: à ¢- ³x.à ¢- ³p ≠¥ à ¢Ã¢â‚¬Å¾Ã‚ /2 (1.26) This equation means that the smaller is the carrier localization in the nanostructure, the larger is the spread in the momentum p, or, better said for semiconductor systems, in the crystal momentum à ¢Ã¢â‚¬Å¾Ã‚ k. The energy may still be well defined, but the momentum is not well defined. In bulk systems, for states around the edge of conduction and valence band, the dependence of the energy on the wavevector k is quadratic, Where m* is the carrier effective mass. Following this equation, the spread in the momentum à ¢Ã¢â‚¬Å¾Ã‚ k gives minimum kinetics energy to the localized particle. This is in contrast with the classical physics, where the lowest energy state in whatever potential corresponds to no kinetic energy. The uncertainty principle of quantum mechanics imposes a positive zero-point energy, which is approximately inversely proportional to the square of the nanostructure size. Therefore, the energy of theground state of electrons and holes in semiconductor nanostructures not only depends on the materials but also on the dimension of the confinement region. Nanostructured materials with a size range of 1-100 nm have been the focus of recent scientific research because of their important optical properties, quantum size effects, electrical properties, chemical properties, etc. The low-dimensional materials have exhibited a wide range of optical properties that depend sensitively on both size and shape, and are of both fundamental and technological interest. The ability to control the shapes and size of nanocrystals affords an opportunity to further test theories of quantum confinement and yields materials with desirable optical characteristics from the point of view of application. The exciting emerging important application of low-dimensional nanocrystals is in light-emitting diodes (LEDs) and Displays. Recently, there has been much recent interest in low dimensional systems such as quantum well (two dimensional system), quantum wire (one dimensional system) and quantum dot (zero dimensional system). Optical properties of low-dimensional systems are substantially different from those of three-dimensional (3D) systems. The most remarkable modification comes from different distributions of energy levels and densities of states originating from the spatial confinement of electrons and holes. The simplest model for two dimensional (2D) systems is that of a particle in a box with an infinitely deep well potential, as shown in Figure 1.6. The wave functions and energy levels in the well are known from basic quantum mechanics and are described by: ÃŽ ¨n(z)=(2/Lz)1/2 cos ( nÏ€z/Lz ) (1.28 ) n = 1,2,3,†¦. (1.29) Figure 1.6: A particle in a box made of infinitely tall potential barriers In semiconductor quantum wells (two dimensional (2D) systems such as layered materials and quantum wells), both electrons and holes are confined in the same wells. The energy levels for electrons and holes are described by [1.8]: (1.30) (1.31) Where and are the effective masses of electron and hole, respectively If electric dipole transitions are allowed from the valence band to the conduction band, the optical transition occurs from the state described by nh , kx , and ky to the state described by ne, kx and ky . Therefore, the optical transition takes place at energy: (1.32) Where ÃŽ ¼ is the reduced mass given by ÃŽ ¼-1 = The joint density of states Ï 3D for the 3D for an allowed and direct transition in semiconductors is: (1.33) The joint densities of states for 2D, 1D and 0D systems are: (1.34) (1.35) (1.36) Where ÃŽ ¸ is a step function and ÃŽ ´ is a delta function. The sum of quantum confinement energies of electrons and holes are represented by El , Em and En ; where El , Em and En refer to the three directions of spatial confinement Obviously the physics of the nanostructures strongly depends on their dimensionality (Figure 1.7). In a semiconductor structure a given energy usually corresponds to a large number different electronic states resulting from the carrier motion. In a bulk material where the motion can occur in three different directions the density of states increases proportionally to the square root of the energy. In quantum wells the motion in the plane gives a staircase DOS, where each step is associated with a newstate in the confining potential. In quantum wires a continuum of states is still present, but strong resonances appear in the DOS associated with the states in the confining potential. Finally in quantum dots only discrete energy states are allowed and the DOS is therefore a comb of delta functions. The possibility to concentrate the DOS in a reduced energy range is extremely important for a large variety of fundamental topics and device applications. It is at the base of the quantum Hal l effect in quantum well (QW), of the quantization of the conductance in quantum wire (QWR), and of the single electron tunnelling in QDs. In the case of lasers the presence of a continuum DOS leads to losses associated with the population of states that do not contribute to the laser action. Conversely, the concentration of the DOS produces a reduction of the threshold current and enhances the thermal stability of the device operation. Clearly this property is optimized in QD structures. Due to the three-dimensional carrier confinement and the resulting discrete energy spectrum, semiconductor QDs can be regarded as artificial atoms. Figure1. 7: Density of states of three-dimensional ( 3D ) bulk semiconductors, a two dimensional ( 2D ) quantum well, a one dimensional ( 1D ) quantum wire, and zero dimensional ( 0D ) quantum dots. The most striking property of nanoscale semiconductor materials is the massive change in optical properties as a function of size due to quantum confinement. This is most readily manifest as a blue-shift in the absorption spectra with the decrease of the particle size. The blue-shift in the absorption spectra with decrease of particle size in semiconductor nanoparticles is due to the spatial confinement of electrons, holes, and excitons increases the kinetic energy of these particles. Simultaneously, the same spatial confinement increases the Coulomb interaction between electrons and holes. The exciton Bohr radius is a useful parameter in quantifying the quantum confinement effects in nanometer size semiconductor particles. The exciton Bohr radius is given by [1.8]: (1. 37) and an inequality holds. Here and are defined as: and (1.38 ) Where ÃŽ ¼ is the reduced mass given by are the effective masses of electron and hole, respectively. And also ÃŽ µ is the dielectric constant, à ¢Ã¢â‚¬Å¾Ã‚  is the Planck constant. As the particle size is reduced to approach to the exciton Bohr radius, there are drastic changes in the electronic structure and physical properties. These changes include shifts of the energy levels to higher energy, the development of discrete features in the spectra (Figure 1.8). Figure 1.8: A schematic models for the energy structures of bulk solids, nanoparticles and isolated molecules. The quantum confinement effect can be classified into three categories: the weak confinement, the intermediate confinement and the strong confinement regimes, depending on the relative size of the radius of particles R compared to an electron , a hole , and an exciton Bohr radius , respectively. In strong confinement (R , ), the individual motion of electrons and holes is quantized and the Coulomb int eraction energy is much smaller than the quantized kinetic energy. The ground state energy is [1.8]: (1.39) Where the second term is the kinetic energy of electrons and holes, the third term is the Coulomb energy, and the last term is the correlation energy. In intermediate confinement ( ), the electron motion is quantized, while the hole is bound to the electron by their Coulombic attraction. In weak confinement ( ), the center-of-mass motion of exciton is quantized. The ground state energy is written as: (1.40 ) Where is the translational mass of the exciton Figure 1.9: Size dependence of band gap for CdS nanoparticles. In strong confinement, there is appearance of an increase of the energy gap (blue shift of the absorption edge), which is roughly proportional to the inverse of the square of the particle radius or diameter. For example, it can be observed from Figure 1.9 that the strong confinement is exhibited by CdS particles with diameter less than ~ 6 nm (R ~ 3 nm), and this is consistent with the strong confinement effect for particles with The luminescence dynamics in low-dimensional nanostructures also deals with the interaction of light with the material. The interaction of light depends strongly on the surface properties of the materials. As the size of the particle approaches a few nm, both surface area to volume ratio and surface to bulk atom ratio dramatically increases. The basic relationship between the surface area to volume ratio or surface atoms to bulk atoms and the diameter of nanoparticles can be seen in Figure 1.10. Figure 1.10: Surface area to volume ratio and percentage of surface atoms (%) as a function of particle size. It is observed that the percentage of surface atoms in corner and edge vs. Particle sizes display dramatic increase when the size is decreased below a few nm, whereas percentage of face atoms decreases. For particles of ~1 nm, more than 70% atoms are at corners or edges. This aspect is important because light interaction with material highly dependent on the atomic scale surface morphology. As in nanoparticles, a large percentage of the atoms are on or near the surface, therefore, surface states near the band gap can mix with interior levels to a substantial degree, and these effects may also influence the spacing of the energy levels. Thus in many cases it is the surface of the particles rather than the particle size that determines the optical properties. Optical excitation of semiconductor nanoparticles often leads to both band edge and deep trap luminescence. The size dependence of the excitonic or band edge emission has been studied extensively. The absence of excitonic or band edge emission has attributed to the large non-radiative decay rate of the free electrons trapped in these deeptraps of surface states. As the particle size becomes smaller, the surface to volume ratio and hence the number of surface states increases rapidly, reducing the excitonic emission. The semiconductor nanoparticles exhibit broad and Stokes-shifted luminescence arising from the deep traps of surface states [1.25 – 1.27].

Tuesday, August 20, 2019

Background of the Catholic Church Essay -- Religion Papers

Background In the Western world, the schism within the Catholic Church has made its most significant impact due to rapid changes in social standards. Of greatest importance is the evolution of modern society and their response to the reverberated traditions of the Catholic Church as well as the evolving Protestant sects. In consequence of increases in technology and science, modern society has redefined its acceptable and moral behavioral standards within a social setting, whereas, the Catholic Church stands firm in its doctrines despite social and moral movements in the twentieth century. Except for the Second Vatican Council and the Council of Trent, the Roman Catholic Church has not worked to revise its religious traditions in response to a changing society. As a consequence with this unparalleled development, many young adults and the population in general has swayed from the devout Catholic worship.1 From my personal experience I have found it difficult to accept the strict doctrines of the Catholic Church due to a social lifestyle that takes precedent. Secondly, I have appreciation for other religions, particularly Hinduism and sects within Christianity. My attitude does not necessarily correspond with that of the Catholic Church. Specifically, the Catholic Church perceives itself as the only divine route to Heaven. From my perspective, having been born and raised Catholic, I feel that Catholicism strongly disfavors any exploration of other religions or even tolerance of additional religions. I feel that this intolerance is subtly communicated to worshipers. Even if this intolerance it not communicated, there are not measures taken to inform worshipers about other religious practices. This stance is probably ... ...ery emotional responses such as tears. However, this should not be a discouragement because all Catholics are very sensitive to this dramatic difference in celebrating God and it does take time to get use to. Mainly it must be known that whether Protestant or Catholic we are worshipping to the same God. By taking a step back and analyzing the differences in religious celebration of this mystery, one can realize the true similarities between the too. In this realization Catholics will be able to fully appreciate and identify with Protestant religious ceremonies. References: 1 Momen, M. The Phenomenon of Religion: A Thematic Approach. Oxford: 1999, 475. 2 DeBruyn, R. Today’s Missal: April 8-June 9, 2001. Oregon: 2000, 81. 3 DeBruyn, R. Today’s Missal: April 8-June 9, 2001. Oregon: 2000, 86. 4 St. Paul African Methodist Episcopal Church. Boston: 2001, 2.

Monday, August 19, 2019

College Sports - Todays Athletes are Privileged Perverts, Rapists, Thie

College Athletes - Privileged Perverts, Rapists, Thieves, Frauds, and Liars    In America today athletic events play an important role in the reflective perception and financial standing of any given community. It is for this reason that the individuals involved in these events are also of significance to the community. Due to the esteemed and very influential role placed on athletes they are often times given privileges that would not normally be given to them if they were not athletes. These privileges are given in order to recruit the athletes, and once recruited to maintain their status on the team so that, in turn, the team's status is not adversely affected. To understand the importance of the role of an athlete one must first examine the role of the athletic event in which the athlete participates and the level of importance placed on this event. Many communities see the local college athletic teams as a reflection of their society. It is therefore important to the community members that their team represents them in the best way possible. Due to American society being of a competitive nature, the basis on which democracy is built, the way a team's representation is judged is by its level of play. If a team is successful in its competitive meetings with other teams it asserts itself into a superior position over those teams. This in turn creates a sense of pride in the community because the team that represents them has beaten the teams that represent other communities. This develops a greater fan base and more support than if a team was to lose "because people aren't going to come watch a losing team" (qtd. in Suggs A42). This support is important to the team because this is where the team receives the majority o... ...ic ability and performance is based primarily on the athletes that participate in the athletic programs. In order to recruit and retain the best athletes for their college athletic programs coaches and colleges alike have made many exceptions and broken many rules. The preferential treatment of athletes is just one of the areas where these exceptions have been made. No matter the area where the exceptions are made these variances from the societal norm are brought about by the high demands and expectations placed on athletic teams to represent their community through success in competitive endeavors. Again, a team's level of success determines its level of community support and therefore determines its survival due to its need to be self-sufficient. Unfortunately the exceptions made and privileges given are often at the expense of the average student, the non-athlete.